Hey Guys,
while Iīm waiting for the Friultracks for the Luchs i decided to start another 1/72 build.
As some of you may know, I like these new little kits from Revell as the detailling and fit are great even ootb.
But as I like to test myself from time to time i decided to do some extra work on the Pz. III Ausf.L .
I will not use any aftermarket-stuff for it
.
I opened the "Rommelkiste".
I removed the flap and build a new wall (the one toward the turret) from Evergreen Sheet.
The flap itself had to be sanded thinner, same with the walls (sorry, donīt know if that is the correct english word) where i used a blade to thin them down a bit.
After that i layed in a tarp (fixed with Future) and some equipment. The equipment will be removed for sanding and painting once the future is dry and the tarp hardened. Some more equipment will follow to hide those ugly pinmarks.
Weld beads will be made from stretched sprue and the massive handles have been cut away and new ones from thin wire were made.
A close up on the weld beads.
Thatīs it for now, i hope you like it (even though itīs just 1/72
)
Markus
Threaded Mode
