Go Back   planetArmor > planetArmor Features > Photos: In-progress Blogs

Photos: In-progress Blogs Post your in-progress photos in a blog-style topic!
Request vBench Photo Upload Access

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-13-2015, 08:02 PM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Dora 1/35

Hi to all, here is my next project, the massive Dora kit. I always wanted one since I saw the add on the pages of finescale modeler, but the price was too high. Then it got even more expensive due to its shipping weight. Finally after 8 years my dream came true, I Got it for $560 including shipping from Germany and Here it is, 35+ pounds of plastic, 3200+ parts including PH and aluminum rails.

I’m a happy modeler



Compared to a tiger box

Also have the excellent book by Mr. Taube for reference, the decals from peddinghaus
And the aluminum shells from Mr. Schatton



Here the giant shell compared to a trumpeter figure body


Opening the big box you encounter the instruction book and five boxes numbered 2-6.


Each box has its number and the information of the bags inside and the parts inside each bag

Here are some of the boxes and its parts, all the boxes are full to the top

And the bag of screws

Each bag has all the info on its contents and the box it belongs to

So the work started by fixing one of the mayor problems on the kit, the cars, they did 4
Long cars instead of the 8 smaller cars that Dora had. It will be impossible to turn in a real radius with the cars as they come. So to fix it you have to cut the cars in half ending
With 8 five axle cars, two for each end of the main mount.

Here the sides and top parts of one of the cars ready to be cut
Attached Thumbnails
Click image for larger version

Name:	Krupp,Dora.jpg
Views:	394
Size:	24.7 KB
ID:	8953  
__________________
"Don't be afraid of the model,it's you the one holding the knife"

Last edited by Fledermaus; 07-27-2017 at 06:53 AM.
Reply With Quote top
  #2  
Old 06-13-2015, 08:03 PM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408


After all the parts are cut it looks like this

First you cut in the center, then cut again each side to approximate 2-3mm to compensate
For movement.


Then I removed what is left of the ring from each half and sanded the area smooth



Next is the assembly of the brake system and wheels, its a million parts for this area
All the sprues for the brakes and wheels

80 wheels and 40 axles

And all the parts cleaned and ready to install


That’s all for now as soon as the cars are ready I will post the photos
Thanks for watching
[attachment=10241]he721067.jpg[/attachment]
Attached Thumbnails
Click image for larger version

Name:	Krupp,Dora.jpg
Views:	470
Size:	24.7 KB
ID:	8952  
__________________
"Don't be afraid of the model,it's you the one holding the knife"

Last edited by Fledermaus; 07-27-2017 at 06:54 AM.
Reply With Quote top
Users like Fledermaus's post!
  #3  
Old 06-14-2015, 12:07 PM
Gopher's Avatar
Gopher Gopher is offline
vBench
 
Join Date: Mar 2007
Location: Moscow, Russia
Posts: 1,476
Send a message via ICQ to Gopher
Damn, it's too big! )))
__________________
Andrey

Reply With Quote top
  #4  
Old 06-17-2015, 12:00 AM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Hi Andrey, yes it is a very big kit almost 2.5 feet longer than the schnellboot
__________________
"Don't be afraid of the model,it's you the one holding the knife"
Reply With Quote top
  #5  
Old 06-24-2015, 02:43 PM
Bugbear Bugbear is offline
vBench
 
Join Date: Feb 2011
Posts: 51
thatīs what i call a big gun.
you've got the DAK-tiger I'm always looking for.
Reply With Quote top
  #6  
Old 06-25-2015, 12:32 AM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Hi Bugbear, yes its a big gun, still deciding where Im going to display it when finished. The tiger I got it on ebay, I was bidding on one and thingking I was not going to win it I bid on a second One, ended wining both for 100 each. I keep both for a couple of moths and finally sold the second one on ebay, and for my surprice it sold for 200 so I can say the one I kept was for free. Now this are hard to find and very expensive .

Abdin
__________________
"Don't be afraid of the model,it's you the one holding the knife"
Reply With Quote top
  #7  
Old 06-28-2015, 04:21 PM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Hi to all and thanks for your comments, here with an update on the Dora, work continues on the 8 cars brake system and wheels.

The brake system is very detailed and has many parts making it time consuming


The wheels and axles are cleaned and ready to install

With the brakes finished I installed the sides of the car followed by the wheels, the walls snaps in to place neatly and also have bolts to secure and reinforce it.

All the parts glued in place


Next upper part of the car is detailed and the side ladders are assembled, please note that the parts position are reversed on the instructions, so part 19 goes on the upper side and 20 goes down.

The front of the car is also very detailed and the coupling mechanism is movable.


Side and top details


The other end car

This two were once a long 10 axle car, you can see the differences between each.
Now you have four of each, 4 for the front and four for the back of the main carriage.


Finally I made 8 end plates out of styrene sheet to cover the end of each car were it was cut




After the cars are finished I took a look at the aluminum rails and noticed it look oversize,
so I search on other Dora builds and confirmed the rails are too big. The rails are 8mm tall by 7.1
Wide, compared to a regular trumpeter rail that is 5 mm tall by 3.1 wide. Here you can see the
Difference in size
A trumpeter figure with the aluminum rail
__________________
"Don't be afraid of the model,it's you the one holding the knife"

Last edited by Fledermaus; 07-25-2017 at 08:40 PM.
Reply With Quote top
  #8  
Old 06-30-2015, 02:57 PM
Gopher's Avatar
Gopher Gopher is offline
vBench
 
Join Date: Mar 2007
Location: Moscow, Russia
Posts: 1,476
Send a message via ICQ to Gopher
Good start Abdin!
__________________
Andrey

Reply With Quote top
  #9  
Old 06-30-2015, 08:42 PM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Thanks Andrew, more soon
__________________
"Don't be afraid of the model,it's you the one holding the knife"
Reply With Quote top
  #10  
Old 07-21-2015, 12:51 PM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 408
Hi, here with another update on the Dora build, started to work on the bridges connecting the cars.
Here one of the bridges, very nice details, even the welding on the sides is all there.

First the PE wire mesh is installed


Next the small 2 steps ladders are constructed, they made the ladders with only double tubes
As steps, in my opinion and after looking all over the book I don’t think it is right. So with balsa wood I constructed the steps for each ladder.

In this photo you can see what I mean by double tubes steps, and the new wood step

The finished ladder looks way better with the wood steps

Now the storage boxes on front of the cars are modified, the hinge details are too big, so with a
Small file I sanded it down to a more to scale size.

Now that the hinges are resized I added details and latches to the small access door on top of the box


Also handles made with copper wire

The other box is detailed also

The strange looking locking system is my interpretation of it after melting my eyes looking at the photos on the Taube book

Some rivet details were added with archers resin rivet detail decals

Here the ladders and boxes in place

Now I moved to the installation of the hand rails, as you can see this are way too tall, to the trumpeter figure body it is up to his chest.



I’m thinking between cutting it down to the correct high or replacing it with brass rod.
Thanks for watching
Abdin
__________________
"Don't be afraid of the model,it's you the one holding the knife"

Last edited by Fledermaus; 07-25-2017 at 06:56 AM.
Reply With Quote top
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1/35 Dora camokid Market 0 08-16-2011 12:21 PM
My Dora SDKFZ Photos: In-progress Blogs 45 03-10-2009 09:19 PM
Soar Art Dora HairySteve Axis: World War II 11 10-05-2008 06:13 PM
Dora dio James Tainton Axis: World War II 1 08-27-2007 04:55 AM
Dora 1/35 Scale brokeneagle Photos: In-progress Blogs 41 07-23-2007 09:00 AM


All times are GMT -5. The time now is 03:43 AM.

Advertise with Us

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
planetArmor