Bronco"s Sd.Kfz.6/3 Diana

[Flak]

I have got the Bronco's kit



I'm planning to build the #7 vehicle...I'm looking for any photos of the #7 vehicle. Any one can sharing it??? That will be GREAT!!!

[schlichtr]

Originally Posted by Flak

I'm planning to build the famous #7 vehicle...

Why is it famous? Just curious. Never heard of the "Famous" #7 Diana.

Roy

[panzerjager]

Niiice subject!! I hope you star it soon!



There are some links with pics in my webpage:

http://infopanzer.atspace.com/halbketten.htm

Darío

[gibbs]

it will be a nice building!!!

[Flak]

Bronco made the chassis in one piece slide molding...and the details looks good



The part #F6 is little bit larger than the inner of the chassis I have trimed it by 0.25mm each side. Then it sit well onto the inner of chassis



All the suspension channels are in it position

[Tarok]

Looking forward to following your build of this kit

Excuse my ignorance, but why was "#7" famous?

Rudi

[Flak]

Originally Posted by Tarok

Looking forward to following your build of this kit

Excuse my ignorance, but why was "#7" famous?

Rudi

Dear guys,

Sorry for my poor english...I used the wrong wording "FAMOUS"...and I have already removed it from the pervious sentence...

[chadperkins]

guess i missed when this was released, first i've seen of it. looking forward to seeing how it comes together. definately different.....

[Flak]

I replaced some details of the leaf spring by 0.2mm brass plate and 0.5mm diameter brass rod...



Completed the Front Suspension...

[Flak]

Finish the assembled of the Front Wheels and the Drive Sprockets…without any problems.



There have 2 different styles of the Road Wheels. Found one group of the Road Wheels (Parts # A27 and A28) have about 0.3mm gap between the inside of the 2 halves of Wheels parts.



I trimmed down the boss of the Parts # A28 by 0.3mm. It is well matched now.



Finish the assembled of the 2 styles of the Road Wheels