planetArmor

planetArmor (http://www.planetarmor.com/forums/index.php)
-   Photos: In-progress Blogs (http://www.planetarmor.com/forums/forumdisplay.php?f=140)
-   -   SdKfz 251 D megamix (http://www.planetarmor.com/forums/showthread.php?t=6324)

Gopher 07-30-2009 04:26 PM

SdKfz 251 D megamix
 
1 Attachment(s)
Hello planeterians!

As I said earlier in KV-220 thread, I've started "just for fun" OOTB project.
It's one more 251 D - I really love this babe :).

You may note "megamix" in title.
And of course have some questions what does it mean :).

The right answer is:
1. Tamiya hull and fenders
2. Dragon interior and storage bins (left after 251 in zimm project)
3. Atak canvas cover.
4. Different parts from my spare part box.
5. Different PE parts (mostly from Aber).
6. Some scratchbuilding.

Step 1 - lower hull interior

Thanks God, Tamiya and Dragon have the same main dimencions (length and height), but not all.

I've trimmed froor for about 1,5 mm from both sides.
Firewall also trimmed for 2 mm from the lower side.
Additional armor - Tamiya 0,5 mm pla plate.
Bolts are from old Zvezda JSU-152 drive sprockets.

Gaps between floor and lower hull will be masked by different crew stuff :).

http://img198.imageshack.us/img198/8636/p7310002.jpg

http://img198.imageshack.us/img198/7488/p7310004.jpg

All comments are welcomed.

Coops 07-30-2009 05:16 PM

Boy you have lots of fun :).
I like your work, always interesting.

T90 07-30-2009 05:58 PM

Interesting project...Really megamix...:)

lupanzer 07-30-2009 07:16 PM

Andrey.

...nice project!...very clean assembly...anxious to see more!

Regards!

Luiz.

serpico 07-30-2009 08:20 PM

Hey Andrey,

Nice model and idea....:thumb:

I noticed you have 2 fire extinguishers on the rear, I think there was only one on the right side on the D model.(Squadron Signal 251 Walk Around, Hans-Heiri Stapfer)

It looks as though the front dash board is too high? Will the top fit over? I see a pretty big gap......;) Unless I'm blind...:D

Flak 07-30-2009 09:01 PM

Nice clean build...keep it up

brokeneagle 07-30-2009 09:12 PM

Nice build. Kit bashing is always the best fun!

astralscooter 07-31-2009 01:41 AM

Quite a bit of kit bashing there :)

One thing though. The PE mounted on the rear of the back rests of the driver and radio operator seats. Haven't seen them go there before? I'm not quite sure what those holders are for, but I've only seen them attached to the hull sides. Any reference photo showing them in this position?

Looking good and makes me wanna start another run of 251s.

Arild :)

Ropi 07-31-2009 01:47 AM

That looks great, Andrey, keep going! :)

no_man_army 07-31-2009 02:06 AM

that looks smart mate, nice job


All times are GMT -5. The time now is 08:02 PM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
planetArmor